A load test for your printer. All axes move at once: the toolhead flies tilted orbits, a climbing spiral, transfer orbits and a figure eight, all on smooth G2/G3 arcs, while Z rises and falls along every arc. No heating, no filament. Enter your machine, watch the mission, copy the macro.
Prefer not to configure anything? The universal orbita.cfg reads the axis limits and Z speed from your printer.cfg. Straight onto the printer over SSH:
wget -O ~/printer_data/config/orbita.cfg https://revo3d.pl/media/orbita/orbita.cfg
Save it as orbita.cfg next to printer.cfg (Mainsail or Fluidd: Machine → Config files).
Add [include orbita.cfg] to printer.cfg. If you have no [gcode_arcs] section yet, add it too, with resolution: 1.0. Restart Klipper.
Type ORBITA in the console. Change the speeds right in the command: ORBITA SPEEDS=80,160,240 (one round per speed) or ORBITA SPEEDS=150 Z_SPEED=8. ORBITA ROUNDS=1 runs the first round only. The mission ends with XY homing and “mission complete”.
Before launch: empty the bed, stay at the machine and keep a hand near the emergency stop. For Cartesian, bed-slinger and CoreXY printers, not delta. The orbits stay inside the area you set and the macro never asks Z to go faster than the speed you entered.